Non-ferrous materials extractor
The Ellipto is an Eddy Current Separator dedicated to the extraction of non-ferrous metals from bulk flows (MSW, WEEE, ASR, Clinker...).
The value of raw materials, such as aluminum or copper, makes essential the use of such tools in waste sorting centers.
MTB innovates with this machine and offers a patented system without dielectric tube. This technical feat allows the possibility to generate a strong magnetic field at the head of the conveyor, greatly improving sorting quality.
In addition, the patented elliptical conveyor which inhibits the gravity of the particles optimizes the path of the induced metals thus enhancing product stability and sorting. Hence, such feature allows to increase the belt speed, and improves as well the sorting capacity of the flow. These technological innovations focus on one purpose: optimizing non-ferrous metal separation performances.
The double deflector is set with a steering wheel with digital indicator consequently allowing highly accurate settings with ease, with only one operator. The machine is set with the famous belt change system, done in less than an hour, including all operation.
The Ellipto machine comes in two different versions, and each time is designed to over perform the market on very specific application. The Ellipto is the standard Ellipto particularly effective for high capacity processes with Aluminum parts such as MSW. It is also the most effective on complex metals flows with fractions above 20 mm in diameter. Finally, the Ellipto MAX is dedicated to fractions smaller than 20 mm, and particularly effective for fractions below 5mm.
This machine revolutionizes the usual treatment of various waste streams, because its range can treat 100% of the flow after volume reduction.
The new Ellipto MAX is an Eddy Current Separator dedicated to fractions smaller than 5 mm, and equally effective for fractions up to 20mm.
This machine is intended for the extraction of fine non-ferrous metals from bulk flows (Cables, WEEE, ASR, Clinker, Shredding Residue...) extracted through sieves after grinding. Such material is usually lost as it is way more difficult to sort out. This major breakthrough thus provides an impressive added value to your recycling center.
MTB innovates with this machines for the reliability of treatment on 0-20 mm fractions. As for the classic Ellipto, there is no dielectric tube, which reduce the distance the inductor and the strip. More specifically, the brand new inducer with very high magnetic field turns up to 5,000 RPM, which is essential to separate ultra-fine fractions from one another.
In addition, the conveyor adopts a suitable parabolic shape which inhibits the gravity of the particles, in order to optimize the path of the induced metals.
Finally the double deflector for fine and ultra-fine is set with a steering wheel with digital indicator consequently allowing highly accurate settings with ease, with only one operator.
Thanks to those innovations, the Ellipto MAX allows a more effective extraction of non ferrous fine particles, but also greatly increases the capacity (up to 3 times more) compared to existing eddy current system.
This machine revolutionizes the usual treatment of various waste streams, because it focuses on a fine fraction often neglected by recyclers. The Ellipto MAX is the solution to treat 100% of the flow after volume reduction.
Our consultants will help you to choose the best combination for your application.
The eddy current separator, MagPro-style…
The reference for the fines fraction from 0 to 5 mm.
The D15 is distinctive from other machines on the market due to its innovative architecture and the unique way that it works. The machine features a disk-type inducer with very high magnetic values, making it a universal, high-performance machine that provides unrivalled separation quality. It was initially designed for extracting non-ferrous metals from clinker, shredded vehicles, WEEE, etc. It is also highly effective at separating non-ferrous metals such as copper/lead, aluminium/copper, zamak/lead, etc. It is comfortable with particle sizes of up to 15 mm, excelling with particles sizes between 0 and 5 mm.
Combined performance and ergonomics…
This machine, however, is not noted only for its exceptional performance. With its easy-to-use settings, the machine can be used to its maximum potential in an instant. And wear parts can easily be replaced in less than 15 minutes. Furthermore, its compact design makes it easy to install just about anywhere.
" Simple but effective tools born of real innovation" By combining the Ellipto separator and the D15, all your fractions will be recycled. Both D15 and Ellipto are patented. "
MTB’s very efficient Customer Service Department responds all inquiries quickly.
Our after the sale department will assist you with:
- Refurbishing of any MTB equipment
- Organizing any maintenance activities
- Supplying all spare parts for our equipment
Contact our Customer Service Department